Puch Cobra Cross - Desconocida

Hello,

I'm writing from Budapest, Hungary!

I have a Puch cross, but I don't know what is the type of my motor.

Could anybody help to me?

Hello!!!
Welcome!!!

This moto is very rare, i don't know what model is!!!

Any idea??

hello regards from gijon, spain!!, probably the motor is the same of the cobra spain model, the reference is 337-80, but the frame and the rest of the bike is unknown for me, i Hope that helped a little, bye!!

The first thing you are welcome to the forum Slampixxx is a pleasure to have you.

Sure there are people more knowledgeable than me, but I can tell my knowledge the following:

The truth is that this model is very different outside the models were sold in Spain, there are many similarities at the frame and cushioning to our models, except the engine, if it is equal.

The engine, I would say is 80 cc. and not the 50 cc engine and putting 337-80 (the portfolios have the ports open) but with a carburetor rather old, maybe a bing?.

The chassis is similar to the steering head to the height of the cylinder, the MC of a cobra, then the back, from the engine mounts to the tubes that hold the seat frame are similar to the "cascahuevos.

Sorry I can not help more Slampixxx, but as I said, I have no knowledge that this model is sold in Spain puch.

Here you have pictures of almost all puch motorcycles that were manufactured in Spain:

http://www.slide.com/r/OsDoL9lM4T_7a_nP51T4kdq-UI72ymDu?previous_view=TICKER&previous_action=TICKER_ITEM_CLICK&ciid=1513209474912886639

A greeting.



Lo primero seas bienvenido al foro Slampixxx, es un placer tenerte entre nosotros.

Seguro que hay personas mas entendidas que yo, pero por mis conocimientos te puedo decir lo siguiente:

La verdad es que este modelo es muy distinto exteriormente a los modelos que se vendian en España, no hay muchas semejanzas a nivel chasis y amortiguacion a nuestro modelos, salvo el motor, que si es igual.

El motor, yo diria que es de 80 cc. y no el de 50 cc, ya que pone motor 337-80 (los carteres tienen las lumbreras abiertas) pero con un carburador bastante antiguo, ¿ quizas un bing ?.

El chasis se parece de la pipa de direccion hasta la altura del cilindro, al de una cobra MC, luego de la parte trasera, desde los soportes del motor hasta los tubos que sujetan el asiento, se asemejan al chasis de las "cascahuevos".

Siento no poder ayudar mas Slampixxx, pero como te dicho, no tengo conocimiento de que este modelo de puch se vendiera en España.

Aqui tienes fotografias de casi la totalidad de motocicletas puch que se fabricaron para España:

http://www.slide.com/r/OsDoL9lM4T_7a_nP51T4kdq-UI72ymDu?previous_view=TICKER&previous_action=TICKER_ITEM_CLICK&ciid=1513209474912886639

Un saludo.

Thank you for the helping!

I think, this motor was manufactured in Germany/Austria.
I bought it next to the Austrian border.
But I didn't found any information about my motorbike.

The motor is a 337-80, but I don't know what is the frame.

Hallo,
I am not sure, but i think the
Motor is Austria/Germany Cobra GT 80 Model.
Frame looks like M50 Jet or Cobra GT.
Fork looks like Puch GS 125...? Betor? Marzocchi??
Swing arm ??
Tank from Ranger TT 25??

I hope it helps a little bit... Your Bike is a good Mix...

Greetings
Alex

Tiene una pinta pepino de la hostia









It has a pinta pepino from the hostia, you know.

I got a letter from a German people:

Rahmen von einer Cobra GT oder Jet
Schwinge nicht ganz sicher Cobra TT Gelände auf jeden Fall
Tank Ranger 25 TT
Gabel von MC/GS 125/175
Rad von MC/GS 125/175 Akronthochschulterfege mit Grimeca - Nabe
Getriebe von einer Cobra 80
Zylinder 72ccm
Luftfilterkasten Cobra GT oder Jet

Resumiendo:

La moto es un poco de todo. Bonita tambien.

Un saludo.